Maxton Design Rear Valance Ford Focus Mk2 St (Preface)
- Regular price
- £184.00
- Sale price
- £184.00
- Regular price
-
REAR VALANCE FORD FOCUS ST
Fits only: Ford Focus mk2 ST preface version 2004 - 2007
COMPLETE SET CONTAINS:
REAR VALANCE
Fitting:
The rear valance has 3 long threaded bolts. Firstly, position/line up the rear valance against the rear bumper. Mark where the bolts make contact with the bumper, you will the need to drill a holes for each marked point. You can now slide the threaded bolts into the holes, use 5mm nuts and washers to mount the diffuser. We would also recommend using 3M tape or glue on the left and right corners for a more secure fit.
The diffuser is designed for a standard (same as factory) exhaust system with twin 3'' tailpipes.
Once you decided to install it with a higher dimension pipes you must be sure they do not collide with the diffuser (they're not too close).
High temperature of tailpipe can follow to deformation (melting) of the item.
Any custom modification is a choice of the owner and must be properly checked before fitting.
Product is made of ABS plastic.
ABS material was created specifically for use in the automotive industry.
ABS is used in production of factory bumpers and other car body parts.
ABS products are characterized with increased strength and flexibility.
This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).
REAR VALANCE FORD FOCUS ST
Fits only: Ford Focus mk2 ST preface version 2004 - 2007
COMPLETE SET CONTAINS:
REAR VALANCE
Fitting:
The rear valance has 3 long threaded bolts. Firstly, position/line up the rear valance against the rear bumper. Mark where the bolts make contact with the bumper, you will the need to drill a holes for each marked point. You can now slide the threaded bolts into the holes, use 5mm nuts and washers to mount the diffuser. We would also recommend using 3M tape or glue on the left and right corners for a more secure fit.
The diffuser is designed for a standard (same as factory) exhaust system with twin 3'' tailpipes.
Once you decided to install it with a higher dimension pipes you must be sure they do not collide with the diffuser (they're not too close).
High temperature of tailpipe can follow to deformation (melting) of the item.
Any custom modification is a choice of the owner and must be properly checked before fitting.
Product is made of ABS plastic.
ABS material was created specifically for use in the automotive industry.
ABS is used in production of factory bumpers and other car body parts.
ABS products are characterized with increased strength and flexibility.
This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).
We keep a large inventory of stock at our warehouse however due to widespread delays in the industry, some items may be on backorder. If you need parts ASAP then please contact us on the live chat or at support@wayside-performance.co.uk and a member of our team will get back to you.
Unsure on fitment? Just drop us a message on the live chat or support@wayside-performance.co.uk and a member of our team will assist. Please make sure to include as much detail as possible including make, model, registration and the parts you are looking at.
