Corsa D & E VXR Forged engine rebuild

Corsa D & E VXR Forged engine rebuild

Corsa D & E VXR Forged engine rebuild

Regular price £3,600.00

Guaranteed safe & secure checkout

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Facebook Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Full engine removal strip and rebuild with forged engine internals for Z16/A16/B16 engines found in Corsa D & E VXR

All our forged engine rebuilds on the Corsa VXR are taken .5mm oversized. Engines are removed from the vehicle and engine blocks taken to our specialist machine shop where they crack tested then acid dipped to remove all corrosion and build up in oil galleries and coolant jackets. They are then rebored to suit the .5mm oversized pistons.

  • Engine removed, stripped & assessed
  • Engine block acid dipped and crack tested
  • Crankshaft polished
  • Cylinder head reconditioned - Skimmed, pressure tested, stem seals replaced + valve seats recut and valves re-seated with cam/lifter clearances set.
  • Wiseco Forged pistons (8.8:1)
  • PEC Forged Conrods (Optional upgrade to ZRP rods)
  • ACL Race bearings - Clearances adjusted to suit owners use for the engine
  • OE Cambelt & Waterpump kit
  • OE Oil pump
  • OE Bottom gasket kit
  • OE Top gasket kit
  • OE Head bolts
  • Millers Running-in oil + OEM filter
  • Millers Nanodrive engine oil + OEM filter

Dynamic balancing of the rotating assembly can be added for extra cost.

Cylinder head can be ported for additional £480


While engine is removed uprated camshafts, valve springs and clutches can be fitted for no additional labour charge.

Once engine is built we will run the engine in on our rolling road and the first oil change to Millers Nanodrive is included in the price.

Turnaround time of 2-4 weeks.

We also have built Forged engines available either on exchange for faster turnaround time or outright purchase. Please contact us for these.

We have reliably ran this spec engine at 340bhp for over 5 years with our higher specced engines running over 450bhp+

Please contact for 400bhp+ engine quotes

Due to the nature of tuning and the use of the engine we are unable to offer any warranty on these builds.

Testimonials

Had a Turbosmart 50/50 dual port blow off valve fitted by Wayside Performance today on my Focus ST Mk3. Great noise. Fantastic service and Chris knows his stuff. Supplied and fitted in under an hour. Definitely recommend.

Shaun P - Google

Hands down the best garage I’ve ever been to. With some expert advise from Chris I was able to get performance out of my car that I could only have dreamt of before

Simi T - Google

Traveled down from Bolton today for injectors and remap on my Corsa VXR Nurburgring. Chris did a great job really happy. Great drive home I would highly recommend.

Ian K - Google

Highly recommend the guys at Wayside Performance. Been using them for nearly 2 years now. Always helpful and willing to go that extra mile.

Maria O - Facebook
Tuning & motorsport specialists
Free UK mainland shipping on all orders!
24/7 Customer service!
In-house Dyno/Rolling road