SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
    SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance
SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion - Wayside Performance

SuperPro SPF4175K Control Arm Lower Front Bush Kit for the 2016 to 2019 Volkswagen Golf MK7 2.0 R 360S 4motion

Regular price
$79.00
Sale price
$79.00
Regular price
On backorder till December  SuperPro's lightweight alloy front control arm kits deliver more caster, camber and eliminate unwan...  Read more

On backorder till December

 SuperPro's lightweight alloy front control arm kits deliver more caster, camber and eliminate unwanted flex.


Exclusive to SuperPro, their alloy arms feature DuroBall rear bushings which are spherical joints embedded in the firm's unique Polyurethane for incredible control without introducing noise, vibration or harshness.

These arms are the best upgrade available. Caster and camber increase gives more steering weight and feel as well as more fun.

ALOY0018K offers a 38% weight saving over the OE arms, increased strength, increased caster, increased camber and much longer service life than the standard factory arms...and they look incredible too!

SuperPro Tip:
Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact.

We also offer standard alignment steel front control arms (TRC1070-MOD) for the same MQB-chassis vehicles which, although they are heavier and don't feature caster increase bushes / anti-lift, they do have upgraded SuperPro bushes so will be a long-lasting simple upgrade.

These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees.

These enhancements are the optimal settings over standard to produce a better handling vehicle.

SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.

The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.

The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Kit Includes:

  • 2 x Arms

Quantity Required: 1

Fitment Difficulty: Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrsFitting Time icon

Wheel-alignment required after fitment

Unit Weight: 7.7250kg

Quantity: 1
Check stock
Please use the live chat to check stock levels
Hassle free returns
14 day returns
Secure & Flexible Payments
Secure payment with multiple finance options
Earn reward points on this item
79 points

On backorder till December

 SuperPro's lightweight alloy front control arm kits deliver more caster, camber and eliminate unwanted flex.


Exclusive to SuperPro, their alloy arms feature DuroBall rear bushings which are spherical joints embedded in the firm's unique Polyurethane for incredible control without introducing noise, vibration or harshness.

These arms are the best upgrade available. Caster and camber increase gives more steering weight and feel as well as more fun.

ALOY0018K offers a 38% weight saving over the OE arms, increased strength, increased caster, increased camber and much longer service life than the standard factory arms...and they look incredible too!

SuperPro Tip:
Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact.

We also offer standard alignment steel front control arms (TRC1070-MOD) for the same MQB-chassis vehicles which, although they are heavier and don't feature caster increase bushes / anti-lift, they do have upgraded SuperPro bushes so will be a long-lasting simple upgrade.

These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees.

These enhancements are the optimal settings over standard to produce a better handling vehicle.

SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.

The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.

The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Kit Includes:

  • 2 x Arms

Quantity Required: 1

Fitment Difficulty: Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrsFitting Time icon

Wheel-alignment required after fitment

Unit Weight: 7.7250kg

We keep a large inventory of stock at our warehouse however due to widespread delays in the industry, some items may be on backorder. If you need parts ASAP then please contact us on the live chat or at support@wayside-performance.co.uk and a member of our team will get back to you.

Unsure on fitment? Just drop us a message on the live chat or support@wayside-performance.co.uk and a member of our team will assist. Please make sure to include as much detail as possible including make, model, registration and the parts you are looking at.

WAYSIDE PERFORMANCE

Related Products

TESTIMONIALS