Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
    Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance
Forge Motorsport Renault Megane RS 280/300 Induction Kit - Wayside Performance

Forge Motorsport Renault Megane RS 280/300 Induction Kit

Regular price
£302.82
Sale price
£302.82
Regular price
Product Description The Renault Megane RS 280/300 intake is the result of widespread design trials through dyno testing and flow...  Read more

Product Description

The Renault Megane RS 280/300 intake is the result of widespread design trials through dyno testing and flow analysis. It was developed to achieve three main objectives: 

  • Maintain low inlet temperatures in comparison to other aftermarket induction kits  
  • Improved air flow 
  • Looks aesthetically pleasing and enhances the look of your engine bay 

Our first criteria has been met by enclosing the PRORam filter with our CAD designed sheet aluminum airbox. The OE location for the airbox is not ideal as it is mounted at the back of the engine bay which inherently gets very warm and so it was crucial in our design to make sure we shielded as much of the hot side as possible. It was imperative to incorporate both OE air ducts in our design to allow as much cold air flow to the filter as possible; all these considerations are in order to keep IAT’s as low as possible.


The second objective was met by trialing and testing of different air filters and we have even gone to the extent of using two different independent dynos to make sure the data collated was accurate. Results showed that we achieved the best gains with the PRORam performance filter.

Unlike other aftermarket intakes our kit utilises a huge velocity stack that in turn houses the filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase the turbos air flow.

When you look at the data, the gains are there to been seen. The Forge Motorsport intake system makes +15bhp improvement even though the ambient temperature in the dyno cell has risen +3°C. The biggest gain we achieved was with the combination of both FMINDK31 FMTIA4. This test was conducted at the hottest period of the day, however it made an outstanding +20bhp along with higher torque figures lower in the rev range, thus improving throttle response. 

We also took the liberty to test a rival intake from the marketplace to see how that compared, this also worked well and demonstrated further, the need of free-flowing filtration on this vehicle. 

The vehicle used for testing was a Renault Megane 280 cup with Stage one K-tec software and performance exhaust and sports cat.

Testing was completed on Litchfield’s Maha dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and Dyno testing. We also used Performance Remap in Gloucester with their VTEC 4 wheel-drive dynamometer. This was to ensure all our data has been achieved with results as accurate as possible by conducting all tests on two independent rolling roads.

Finally, the aesthetical challenge to enhance an engine bay which we felt is bland and a bit messy. Obviously, function over form is our number one priority, however we have tried to produce something which is quite stealthy and classy, but is also purposeful. Finished in our black textured powder coating gives the air box an air of OE quality. The cold side of the air box has been left open to aid breathing and show off the large PRORam filter. When taking this product out of the box for the first time you will get to see and feel the quality of this product. Components like the expertly machined MAF boss and the precision laser cut brackets showcase our manufacturing expertise and reassure the enthusiasts the quality is second to none.   

As a by-product of all the above not only will you notice the increased performance but a slight change in your engine acoustics can also be heard. As with all Forge Motorsport products we offer a no quibble lifetime guarantee on all parts of this kit excluding the filter.  

A commonly asked question is will this fit a competitor’s & OE turbo inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Renault inlet hose. 

  • MAF Boss Manufactured from 6082 aerospace grade aluminium. 
  • Black anodised & powder coating for ultimate protection and durability.  
  • PRORAM performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase air flow. 
  • No engine check lights (EML) 
  • Increased air flow  
  • The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. 
  • This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. 
  • The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically 
  • The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. 
  • Lifetime warranty 

Compatible Vehicles

Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well.

Warranty Information

The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.

Quantity: 1
Check stock
Please use the live chat to check stock levels
Hassle free returns
14 day returns
Secure & Flexible Payments
Secure payment with multiple finance options
Earn reward points on this item
302 points

Product Description

The Renault Megane RS 280/300 intake is the result of widespread design trials through dyno testing and flow analysis. It was developed to achieve three main objectives: 

  • Maintain low inlet temperatures in comparison to other aftermarket induction kits  
  • Improved air flow 
  • Looks aesthetically pleasing and enhances the look of your engine bay 

Our first criteria has been met by enclosing the PRORam filter with our CAD designed sheet aluminum airbox. The OE location for the airbox is not ideal as it is mounted at the back of the engine bay which inherently gets very warm and so it was crucial in our design to make sure we shielded as much of the hot side as possible. It was imperative to incorporate both OE air ducts in our design to allow as much cold air flow to the filter as possible; all these considerations are in order to keep IAT’s as low as possible.


The second objective was met by trialing and testing of different air filters and we have even gone to the extent of using two different independent dynos to make sure the data collated was accurate. Results showed that we achieved the best gains with the PRORam performance filter.

Unlike other aftermarket intakes our kit utilises a huge velocity stack that in turn houses the filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase the turbos air flow.

When you look at the data, the gains are there to been seen. The Forge Motorsport intake system makes +15bhp improvement even though the ambient temperature in the dyno cell has risen +3°C. The biggest gain we achieved was with the combination of both FMINDK31 FMTIA4. This test was conducted at the hottest period of the day, however it made an outstanding +20bhp along with higher torque figures lower in the rev range, thus improving throttle response. 

We also took the liberty to test a rival intake from the marketplace to see how that compared, this also worked well and demonstrated further, the need of free-flowing filtration on this vehicle. 

The vehicle used for testing was a Renault Megane 280 cup with Stage one K-tec software and performance exhaust and sports cat.

Testing was completed on Litchfield’s Maha dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and Dyno testing. We also used Performance Remap in Gloucester with their VTEC 4 wheel-drive dynamometer. This was to ensure all our data has been achieved with results as accurate as possible by conducting all tests on two independent rolling roads.

Finally, the aesthetical challenge to enhance an engine bay which we felt is bland and a bit messy. Obviously, function over form is our number one priority, however we have tried to produce something which is quite stealthy and classy, but is also purposeful. Finished in our black textured powder coating gives the air box an air of OE quality. The cold side of the air box has been left open to aid breathing and show off the large PRORam filter. When taking this product out of the box for the first time you will get to see and feel the quality of this product. Components like the expertly machined MAF boss and the precision laser cut brackets showcase our manufacturing expertise and reassure the enthusiasts the quality is second to none.   

As a by-product of all the above not only will you notice the increased performance but a slight change in your engine acoustics can also be heard. As with all Forge Motorsport products we offer a no quibble lifetime guarantee on all parts of this kit excluding the filter.  

A commonly asked question is will this fit a competitor’s & OE turbo inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Renault inlet hose. 

  • MAF Boss Manufactured from 6082 aerospace grade aluminium. 
  • Black anodised & powder coating for ultimate protection and durability.  
  • PRORAM performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase air flow. 
  • No engine check lights (EML) 
  • Increased air flow  
  • The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. 
  • This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. 
  • The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically 
  • The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. 
  • Lifetime warranty 

Compatible Vehicles

Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well.

Warranty Information

The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.

We keep a large inventory of stock at our warehouse however due to widespread delays in the industry, some items may be on backorder. If you need parts ASAP then please contact us on the live chat or at support@wayside-performance.co.uk and a member of our team will get back to you.

Unsure on fitment? Just drop us a message on the live chat or support@wayside-performance.co.uk and a member of our team will assist. Please make sure to include as much detail as possible including make, model, registration and the parts you are looking at.

WAYSIDE PERFORMANCE

Related Products

TESTIMONIALS