Maxton Design Rear Valance Ford Focus Ii St Facelift (2007-2011)
- Regular price
- £184.00
- Sale price
- £184.00
- Regular price
-
REAR VALANCE FORD FOCUS II ST FACELIFT (2007-2011)
Fits Only:
FORD FOCUS II ST FACELIFT (2007-2011)
Not compatible with: FO-FO-2F-ST-RSD1
COMPLETE SET CONTAINS:
Rear Diffuser
The rear valance has 3 threaded bolts. Firstly, position/line up the rear valance against the rear bumper. Mark where the bolts make contact with the bumper, you will the need to drill a holes for each marked point. You can now slide the threaded bolts into the holes, use 5mm nuts and washers to mount the diffuser. We would also recommend using 3M tape or glue on the left and right corners for a more secure fit.
CHARACTERISTICS:
Adds aesthetic value.
Lightweight and offers some flexibility.
This product is made from ABS plastic. The same material is used widely in the automotive industry.
MORE INFORMATION:
No additional work is required to finish the product.
The product will arrive with a protective film.
Removal of the protective film will void any returns, only remove once you are certain the product will fit.
We cannot be held responsible for the incorrect installation or use of this product.
Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.
We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.
This product has been TUV MATERIALGUTACHTEN certified.
The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
REAR VALANCE FORD FOCUS II ST FACELIFT (2007-2011)
Fits Only:
FORD FOCUS II ST FACELIFT (2007-2011)
Not compatible with: FO-FO-2F-ST-RSD1
COMPLETE SET CONTAINS:
Rear Diffuser
The rear valance has 3 threaded bolts. Firstly, position/line up the rear valance against the rear bumper. Mark where the bolts make contact with the bumper, you will the need to drill a holes for each marked point. You can now slide the threaded bolts into the holes, use 5mm nuts and washers to mount the diffuser. We would also recommend using 3M tape or glue on the left and right corners for a more secure fit.
CHARACTERISTICS:
Adds aesthetic value.
Lightweight and offers some flexibility.
This product is made from ABS plastic. The same material is used widely in the automotive industry.
MORE INFORMATION:
No additional work is required to finish the product.
The product will arrive with a protective film.
Removal of the protective film will void any returns, only remove once you are certain the product will fit.
We cannot be held responsible for the incorrect installation or use of this product.
Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.
We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.
This product has been TUV MATERIALGUTACHTEN certified.
The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
We keep a large inventory of stock at our warehouse however due to widespread delays in the industry, some items may be on backorder. If you need parts ASAP then please contact us on the live chat or at support@wayside-performance.co.uk and a member of our team will get back to you.
Unsure on fitment? Just drop us a message on the live chat or support@wayside-performance.co.uk and a member of our team will assist. Please make sure to include as much detail as possible including make, model, registration and the parts you are looking at.
